Sat with P configuring the Cyberoam CR50i for quite a few hours - 1-4 on two afternoons and 8-11 last night.
Actually info on what we needed to do was there in the knowledge base, what we were doing wrong was
(a) using the hardware ports to create sources for port forwarding while creating virtual hosts, and
(b) not creating simple Accept firewall rules with the virtual hosts as the destination.
So, first go to Firewall -> Virtual Hosts and create as required:
Then the firewall rules to allow connections.
We had to make a similar rule for Wan also, of course.
One more thing which we needed to do was to disable the Web console of cyberoam from WAN. This was found in the User Manual, blandly located in Firewall -> Local ACL
Thank you so much for putting this up. A colleague and I worked for quite a while and finally resorted to google and found this solution. Thanks!
ReplyDelete